The ComNet™ CNFE4SMSPOE is a four-port self-managed Ethernet switch with uplink management functionality. It provides 4 ports operating at 10/100Mbs and is designed to combine Ethernet data from the three electrical ports into a fourth electrical port and forward that data to the next network device. There is no programming required to use this product. The ComNet CNFE4SMSPOE comes pre-programmed, preventing network video flooding with a switch selection that allows the switch to be used as an uplink or as an unmanaged switch. All four ports incorporate PoE+ features based on the IEEE 802.3at standard. It is “Plug-and-Play” easy to use. LED indicators confirm the operating status of this device. The ComNet CNFE4SMSPOE may be either wall mounted, rack mounted (“ComFit” packaging) or DIN-rail mounted with the use of the ComNet DINBKT1 adapter.
Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
Pre-programmed Port for uplink to other Ethernet devices
Automatic MDI/MDI-X crossover
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, highline/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the C
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Power and Activity status LED indicators
Hot-swappable rack modules
Interchangeable between stand-alone or rack mount use – ComFit
IEEE 802.3 compliant
Applications:
IP Video Applications
10/100 Mbps Ethernet
High Speed Computer Links
Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
167 F
Operating Temperature (Minimum):
-40 F
ROHS Compliant:
Yes
Depth:
6.10 in
Height:
1.10 in
Width:
5.30 in
Shipping Weight:
2 lbs
Warranty (Length/Type):
Lifetime
Data Interface:
Ethernet
Data Rate:
10/100 Mbps; IEEE 802.3 Compliant; Full Duplex or Half Duplex Electrical Ports
Power:
Terminal Block
Data:
RJ45
LED Indicators:
Electrical Link/Data Activity; Power; Power over Ethernet (PoE+)
Power:
48 VDC @2.6A
Surface Mount:
Wall or Flat Surface Screw Attachment
Number of Rack Slots:
1
Current Protection:
Automatic Resettable; Solid-State Current Limiters