4 Port 10/100 Mbps Ethernet Unmanaged Switch, 4 TX
Series: CNFE4US
Model: CNFE4TX4US
Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.
Optical port supports 100 Mbps full duplex data
Automatic MDI/MDI-X crossover
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the
Uses interchangeable SFP for fiber type, distance and connector (Ordered separately)
The ComNetâ„¢ CNFE4US Ethernet 4 port unmanaged switch Series is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP options or 10/100 Mbps data over CAT5E/6 electrical cable. This unit integrates 4 independent 10/100 Mbps channels in a single package. The CNFE4FX2TX2US and CNFE4FX4US require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors. The CNFE4FX2TX2US and CNFE4TX4US electrical interfaces will Auto-Negotiate to 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interfaces operate at a 100 Mbps Ethernet rate. All models are environmentally hardened to operate in demanding environments. LED indicators are provided for confirming equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1adaptor plate.
Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.
Optical port supports 100 Mbps full duplex data
Automatic MDI/MDI-X crossover
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the
Uses interchangeable SFP for fiber type, distance and connector (Ordered separately)
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events.
No in-field optical adjustments required
LED Indicators for Power and Activity
IEEE 802.3 compliant
Hot-swappable rack modules
Interchangeable between stand-alone or rack mount use
ComFit
Lifetime Warranty
Warranty - Yes
ROHS Compliant - Yes
Rackmountable - Yes
Spec Sheet available - Yes
Current Protection:
Automatic Resettable Solid-State Current Limiters