The ComNet™ CNFE5SMSPOE is a five-port self-managed Ethernet switch with uplink management functionality. It provides 5 ports operating at 10/100Mbs and is designed to combine Ethernet data from the four electrical ports into a fifth electrical port and forward that data to the next network device. There is no programming required to use this product. The ComNet CNFE5SMSPOE comes pre-programmed, preventing network video flooding with a switch selection that allows the switch to be used as an uplink or as an unmanaged switch. Ports 1–4 can supply up to thirty (30) watts of power (“Power over Ethernet”) and incorporate PoE+ features based on the IEEE 802.3at standard. It is “Plug-and-Play” easy to use. LED indicators confirm the operating status of this device. The ComNet CNFE5SMSPOE may be either wall mounted, rack mounted (“ComFit” packaging) or DIN-rail mounted with the use of the ComNet DINBKT1 adapter.
Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
Pre-programmed Port for uplink to other Ethernet devices
Automatic MDI/MDI-X crossover
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, highline/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the C
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Power and Activity status LED indicators
Hot-swappable rack modules
Interchangeable between stand-alone or rack mount use – ComFit
IEEE 802.3 compliant
Applications:
IP Video Applications
10/100 Mbps Ethernet
High Speed Computer Links
Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
167 F
Operating Temperature (Minimum):
-40 F
ROHS Compliant:
Yes
Depth:
6.10 in
Height:
1.10 in
Width:
5.30 in
Shipping Weight:
2 lbs
Warranty (Length/Type):
Lifetime
Data Interface:
Ethernet
Data Rate:
10/100 Mbps; IEEE 802.3 Compliant; Full Duplex or Half Duplex Electrical Ports
Power Connector:
Terminal Block
Data Connector:
RJ45
LED Indicators:
Optical Link/Data Activity; Power; Power over Ethernet (PoE+)
Power:
48 VDC @2.6A
Surface Mount:
Wall or Flat Surface Screw Attachment
Number of Rack Slots:
1
Current Protection:
Automatic Resettable; Solid-State Current Limiters