Saved to a web server based configuration, requires no electrical or optical adjustments
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage p
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
The contact-mapping ComNet™ CNFE8(X)COE transmits eight contact closures over an Ethernet network. It is available with a 10/100TX RJ45 Ethernet connector and an SFP fiber optic interface. These units can be one-to-one mapped over Ethernet or controlled via a PC. Included is a driver that allows the CoE to read or write contact information from a PC based application. A software utility allows customers to search for this device that is installed on the network. The CNFE8TCOE transmitter and CNFE8RCOE receiver support Windows® Discovery. Distances depend on which SFP (Small Form Pluggable) module is used. The CNFE8(X)COE is environmentally hardened to operate in extreme temperatures. LED indicators are provided for confirming operating status. Packaged in the ComNet ComFit housing, these units may be either wall, rack, or DIN-rail mounted with the addition of the ComNet DINBKT1 adaptor plate.
NTCIP compatible
Remote network configuration
Saved to a web server based configuration, requires no electrical or optical adjustments
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage p
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Power and Port status LED indicators
Automatic resettable solid-state current limiters
Hot-swappable rack modules
Interchangeable between stand-alone or rack mount use – ComFit
Applications:
Access Control Systems
Building Automation and Environmental Control Systems
Computer/Data Equipment
Fire and Alarm Systems
Traffic Signal Control Equipment
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
167 F
Operating Temperature (Minimum):
-40 F
Certifications:
FCC, CE, UL
Depth:
6.10 in
Height:
1.10 in
Width:
5.30 in
Shipping Weight:
1 lbs
Warranty (Length/Type):
Lifetime
Response Time:
25 msec typical, network dependent
Input/Output Channels:
8
Inputs:
Dry Contact Input
Outputs:
0 – 250V, 190mA (AC or DC)
Ethernet:
10/100TX, 100FX
Number of Fibers:
1 or 2, SFP dependent
Fiber Connectors:
Requires selection of sold-separately SFP modules. See ComNet data sheet for number and description of SFP modules
Power:
Terminal Block
Optical:
LC or SC (SFP dependent)
Data:
RJ45
Contact Closure:
Terminal Block
LED Indicators:
- Power - Link - Com - Contact Closure
Power - Surface Mount:
9–12 VDC @ 350 mA
Rack:
From Rack
Number of Rack Slots:
1
Current Protection:
Automatic Resettable Solid-State Current Limiters