1310nm Video Receiver, Multimode

Model: FVR1001M1

10-bit Digital Video Transmission
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Full Color Compatibility
Exceeds RS-250C Short-Haul quality
No In-field electrical or optical adjustments

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The ComNet™ FVT/FVR1001 series video transmitter/ receiver supports the transmission of short-haul quality 10-bit Digitally Encoded video over one multimode or single mode optical fiber. This module is universally compatible with major CCTV camera manufacturers. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are interchangeable between stand-alone or card mount configurations.

10-bit Digital Video Transmission
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Full Color Compatibility
Exceeds RS-250C Short-Haul quality
No In-field electrical or optical adjustments
Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
Integrated WDM for greater product reliability
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Distances up to 69 km (43 miles) without repeaters
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage p
Hot-Swappable Modules
Automatic resettable fuses on all power lines
Applications:
CCTV

Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 167 F
Operating Temperature (Minimum): -40 F
Certifications: FCC, CE, UL
ROHS Compliant: Yes
Signal to Noise Ratio: 67 dB
Depth: 6.10 in
Height: 1.10 in
Width: 5.30 in
Shipping Weight: 2 lbs
Warranty (Length/Type): Lifetime
Video Input: 1 V pk-pk (75 ohms)
Overload: >1.5 V pk-pk
Bandwidth: 5 - 10 Hz - MHz
Differential Gain: <2 %
Differential Phase: <0.7 °
Tilt: <1 %
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
Wavelength: 1310 Nm Multimode and Single Mode
Number of Fibers: 1
LED Indicator: Optical - Video - Power
Optical Connector: ST
Power Connector: Terminal Block
Video Connector: BNC (Gold Plated Center-Pin)
Power: Surface Mount: 8-15 VDC @ 2 W
Rack Mount: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
MTBF: >100,000 hours
Storage Temp: -40 to +85 °C
Relative Humidity: 0 to 95 % (non-condensing)