Video Receiver/Data Transceiver (1550/1310 nm), Singlemode

Model: FVR1021S1

10-bit Digital Video Transmission
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Full Color Compatibility
Exceeds RS-250C Short-Haul quality
Supports RS-232 and RS-422 data interfaces

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The ComNet™ FVT/FVR1021 series video transmitter/ receiver and data transmitter/receiver supports the simultaneous transmission of short-haul quality 10-bit Digitally Encoded video and return data over one multimode or single mode optical fiber. This module is universally compatible with major CCTV camera manufacturers and supports RS-232 and RS-422 data interfaces. The FVT/FVR1021 allows the user to set the data through a switch on the unit. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

10-bit Digital Video Transmission
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Full Color Compatibility
Exceeds RS-250C Short-Haul quality
Supports RS-232 and RS-422 data interfaces
Supports Manchester and bi-phase data
No In-field electrical or optical adjustments
Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
Integrated WDM for greater product reliability
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Distances up to 69 km (43 miles) without repeaters
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage p
Hot-swappable rack modules
Interchangeable between stand-alone or rack mount use – ComFit
Automatic resettable fuses on all power lines
Applications:
CCTV with one-way PTZ Camera Control
CCTV with Remote Signalization

Warranty - Yes
ROHS Compliant - Yes
Rackmountable - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 167 F
Operating Temperature (Minimum): -40 F
Certifications: FCC, CE, UL
ROHS Compliant: Yes
Signal to Noise Ratio: 67 dB
Depth: 6.10 in
Height: 1.10 in
Width: 5.30 in
Shipping Weight: 2 lbs
Warranty (Length/Type): Lifetime
Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5 V pk-pk
Bandwidth: 5 - 6.5 Hz - MHz
Differential Gain: <2 %
Differential Phase: 0.7 °
Tilt: <1 %
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
Data Format: RS232, RS422, Manchester, biphase
Data Rate: DC-115 Kbps (NRZ)
Bit Error Rate (BER): <1 in 10-9 @ Maximum Optical Loss Budget
Wavelength: 1310/1550 Nm Multimode and Single Mode
Number of Fibers: 1
LED Indicators: Video Present - Data Present - Power - Optical
Optical Connector: ST
Power Connector: Terminal Block
Data Connector: Terminal Block
Video Connector: BNC (Gold Plated Center-Pin)
Power Surface Mount: 8-15 VDC @ 2 W
Rack Mount: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
MTBF: >100,000 hours
Storage Temp: -40 to +85 °C
Relative Humidity: 0 to 95 % (non-condensing)
Rackmountable: Yes