The ComNet™ FVR10C1(M,S)1 and FVR20C2(M,S)2 series dual-channel video receivers support the transmission of one or two independent short-haul quality 10-bit Digitally Encoded video signals and one or two contact closures in the direction of the video over two multimode or single mode optical fibers. This module is universally compatible with major CCTV camera manufacturers. It is compatible with the FVT10C1(M,S)1/M series single channel transmitters. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly confirming operating status. These units may be either wall or rack-mounted.
10-bit Digital Video, Contact Closure Transmission: Receives one or two real-time color video signals over two optical fibers
Contact Closure
Supports loopback for fiber link testing
Exceptionally low video distortion with zero performance variation vs. optical path
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
NTCIP compatible
Designed to meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
Automatic resettable fuses on all power lines
Hot-Swappable Modules
Interchangeable between stand-alone or rack mount use – ComFit
Warranty - Yes
ROHS Compliant - Yes
Rackmountable - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
167 F
Operating Temperature (Minimum):
-40 F
Certifications:
FCC, CE, UL
ROHS Compliant:
Yes
Signal to Noise Ratio:
60 dB
Depth:
6.10 in
Height:
1.10 in
Width:
5.30 in
Shipping Weight:
2 lbs
Warranty (Length/Type):
Lifetime
Video Input:
1 volt pk-pk (75 ohms)
Overload:
>1.5 V pk-pk
Bandwidth:
5 - 10 Hz - MHz
Differential Gain:
<2 %
Differential Phase:
<0.7 °
Tilt:
<1 %
Max. RG-59 COAX Distance:
100m (300ft) Camera to Fiber Optic Module to maintain Bandwidth
Interface Response time:
0.5 msec
INPUT:
Dry Contact Closure
Wavelength:
1550/1310 Nm MM and SM
Optical Emitter:
Laser Diode
Number of Fibers:
1 or 2
LED Indicator:
Video - Link
Optical Connector:
ST
Power Connector:
Terminal Block
Video Connector:
BNC
Contact Connector:
Terminal Block
Power: Surface Mount:
8 – 15VDC @ 2W
Current Protection:
Automatic Resettable Solid-State Current Limiters