Multimode Video Receiver, Automatic Gain Control

Model: FVR11M

AM Video Receiver
NTSC, PAL, SECAM compatible
Full range Automatic Gain Control (AGC)
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Full color compatibility

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The ComNet™ FVR11M video receiver detects an AM video signal on one multimode fiber optic cable. The receiver utilizes Automatic Gain Control (AGC) and is compatible with the ComNet FVT11M and the FVT20 transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are only available in stand-alone configurations.

AM Video Receiver
NTSC, PAL, SECAM compatible
Full range Automatic Gain Control (AGC)
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Full color compatibility
No in-field electrical or optical adjustments required
Bi-Color (Red/Green) Video Present indicator
Applications:
CCTV (Fixed Video)

Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 167 F
Operating Temperature (Minimum): -40 F
Certifications: FCC, CE, UL
ROHS Compliant: Yes
Depth: 4 in
Height: 1 in
Width: 3.70 in
Shipping Weight: 1 lbs
Warranty (Length/Type): Lifetime
Video Input: 1 volt pk-pk (AGC controlled)
Bandwidth: 5 - 10 Hz - MHz
Differential Gain: <5 %
Differential Phase: <5 °
Tilt: <1 %
SIGNAL-TO-NOISE RATIO (SNR): >55 dB @ 10 dB Attn; >60 dB @ 7 dB Attn
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
Wavelength: 850 Nm Multimode
Number of Fibers: 1
Optical Connector: ST
Power Connector: Terminal Block
Video Connector: BNC (Gold Plated Center-Pin)
LED Indicator: Video Present
Power: Surface Mount: 8-15 VDC @ 60 mA
Circuit Board: Meets IPC Standard
MTBF: >100,000 hours
Storage Temp: -40 to +85 °C
Relative Humidity: 0 to 95 % (non-condensing)