Video Receiver, Singlemode

Model: FVR1C1BS1

8-Bit digital video and contact closure transmission: receives real-time color video signal over optical fiber
Contact closure
Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Wide optical dynamic range: optical attenuators are never required

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The ComNet™ FVR1C1B receives one channel of video over one optical fiber utilizing 8-Bit digital decoding for high-quality video and contact closure transmission. These environmentally hardened units are ideal for use in unconditioned roadside or out-of-plant installations. This module is universally compatible with major CCTV camera manufacturers. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are interchangeable between stand-alone or card mount configurations.

8-Bit digital video and contact closure transmission: receives real-time color video signal over optical fiber
Contact closure
Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Wide optical dynamic range: optical attenuators are never required
NTCIP compatible
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage p
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Robust design ensures extremely high reliability in unconditioned out-of-plant environments
Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
Automatic resettable solid-state current limiters
Hot-swappable rack modules
Interchangeable between stand-alone or rack mount use – ComFit
Applications:
High-Performance CCTV (Fixed Video)

Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes

Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5 V pk-pk
Video Channels: 1
Bandwidth: 10 - 6.5 Hz - MHz
Differential Gain: <2 %
Differential Phase: <0.7 °
Tilt: <1 %
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
Interface Response time: 0.5 msec
Output: SPST Relay, 0.5 A Contact Rating - normally open
Wavelength: 1310 Nm Multimode & Single Mode
Number of Fibers: 1
LED Indicator: Contact - Video
Optical Connector: ST
Power Connector: Terminal Block
Video Connector: BNC (Gold Plated Center-Pin)
Power: Surface Mount: 8-15 VDC @ 2W
Rack Mount: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
MTBF: >100,000 hours
Storage Temp: -40 to +85 °C
Relative Humidity: 0 to 95 % (non-condensing)
Operating Temperature (Maximum): 167 F
Operating Temperature (Minimum): -40 F
Certifications: FCC, CE, UL
ROHS Compliant: Yes
Signal to Noise Ratio: 60 dB
Depth: 6.10 in
Height: 1.10 in
Width: 5.30 in
Shipping Weight: 2 lbs
Warranty (Length/Type): Lifetime