The ComNet™ FVT1D1[/M] video transmitter, along with the FVR1D1 and FVR2D2, supports the transmission of digital video transmission and bi-directional RS422 or 2- or 4-wire RS485 data channel over multimode or single mode optical fiber(s). When the unit is operated in the RS422 2-wire data mode, a simplex contact closure channel is available. This module is universally compatible with major CCTV camera manufacturers. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (red/green) LED indicators are provided for confirming operating status. The small-size FVT1D1/M transmitters are ideal for locations where space is at a premium. Packaged in the exclusive ComNet ComFit housing, the full size transmitter and receiver units may be rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
Digitally Encoded Video
Bi-directional RS422 or RS485 data
Contact Closure available in 2-wire data modes
Compatible with all NTS C, PAL, or SE CAM CCTV camera systems
Full Color Compatibility
No In-field electrical or optical adjustments
Distances up to 33 miles (54 km) without repeaters
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Tested and certified by an independent laboratory for full compliance with the environmental requirements of NEMA TS -1/TS -2 and the Caltrans Specification for Traffic Signal Control Equipment
A utomatic resettable fuses on all power lines
Receivers are hot-swappable rack modules
Receivers are interchangeable between stand-alone or rack mount use – ComFit
Applications:
CCTV
Warranty - Yes
ROHS Compliant - Yes
Rackmountable - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
167 F
Operating Temperature (Minimum):
-40 F
Certifications:
FCC, CE, UL
ROHS Compliant:
Yes
Signal to Noise Ratio:
60 dB
Depth:
6.10 in
Height:
1.10 in
Width:
5.30 in
Shipping Weight:
2 lbs
Warranty (Length/Type):
Lifetime
Video Input:
1 volt pk-pk (75 ohms)
Overload:
>1.5 V pk-pk
Bandwidth:
5 - 6.5 Hz - MHz
Differential Gain:
<2 %
Differential Phase:
0.7 °
Tilt:
<1 %
Max. RG-59 COAX Distance:
100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
Data Format:
RS422, 2 or 4-wire RS485 w/Tri-State, Manchester and bi-phase
Data Rate:
DC-115 Kbps (NRZ)
Contact Interface: Response Time:
0.5 msec
Inputs:
Dry Contact Closure
Outputs:
SPST Relay, 0.5 A Contact Rating - normally Closed
Optical Connector:
ST
Power Connector:
Terminal Block
Video Connector:
BNC
Data Connector:
Terminal Block
Contact Connector:
Terminal Block
Wavelength:
1310/1550 Nm
LED Indicators:
Optical - Video - Data
Surface Mount Power:
9-36 VDC @ 3W, 24VAC
Rack Mount:
From Rack
Current Protection:
Automatic Resettable Solid-State Current Limiters