The ComNet™ FVT/FVR2014 video transmitter/data transceiver and video receiver/data transceiver series utilize 10-bit digital encoding and decoding for high-quality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of two independent video channels and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are interchangeable between stand-alone or card mount configurations.
10-bit digital video transmission: transmits 2 real-time color video signals and 4 bi-directional data signals on one optical fiber
Supports RS232, RS422, and 2 or 4-wire RS485 with tri-state data interfaces
Exceeds all requirements for EIA RS-250C short-haul transmission: Extremely high video performance
Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
Ideally suited to networks requiring multiple physical layers where video degradation may be a problem
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage p
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Robust design ensures extremely high reliability in unconditioned out-of-plant environments
Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
Hot-swappable rack modules
Interchangeable between stand-alone or rack mount use – ComFit
Applications:
High-Performance CCTV (Fixed Video)
Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
167 F
Operating Temperature (Minimum):
-40 F
Certifications:
FCC, CE, UL
ROHS Compliant:
Yes
Signal to Noise Ratio:
67 dB
Depth:
6.10 in
Height:
2.20 in
Width:
5.30 in
Shipping Weight:
2 lbs
Warranty (Length/Type):
Lifetime
Video Output:
1 volt pk-pk (75 ohms)
Overload:
>1.5 V pk-pk
Number of Input/Output Channels:
2
Bandwidth (minimum):
10 - 6.5 Hz - MHz per channel
Differential Gain:
<2 %
Differential Phase:
<0.7 °
Tilt:
<1 %
Max. RG-59 COAX Distance:
100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
Data Channels:
4
Data Interface:
RS232, RS422 and RS485 (2W/4W)
Data Format:
NRZ, NRZI, Manchester, Bi-Phase and Sensornet
Data Rate:
DC-250 Kbps (NRZ)
Bit Error Rate:
<1 in 10-9 @ Maximum Optical Loss Budget
Operating Mode:
Simplex or Full-Duplex
Wavelength:
1310/1550 Nm Multimode and Single Mode
Number of Fibers:
1
LED Indicators:
- Video Sync Presence for Each Video Channel - Received Data - Transmitted Data - Link
Optical Emitter:
Laser Diode
Optical Connector:
ST
Power Connector:
Terminal Block
Video Connector:
BNC (Gold Plated Center-Pin)
Data Connector:
RJ45 (5 pcs. Included)
Power Surface Mount:
8-15 VDC @ 4W
Rack Mount:
From Rack
Number of Rack Slots:
2
Current Protection:
Automatic Resettable Solid-State Current Limiters