18dB Video Receiver, Singlemode

Model: FVR240S1

10-Bit digitally encoded video transmission, transmits 24 real-time/full frame color video signals
Exceeds all requirements for EIA RS-250C short-haul transmission: Extremely high video performance
Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage p

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The ComNet™ FVT/FVR240 series video transmitter and video receiver utilize 10-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of 24 independent video channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

10-Bit digitally encoded video transmission, transmits 24 real-time/full frame color video signals
Exceeds all requirements for EIA RS-250C short-haul transmission: Extremely high video performance
Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage p
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Robust design ensures extremely high reliability in unconditioned out-of-plant environments
Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
Applications:
High-Performance CCTV Systems

Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 167 F
Operating Temperature (Minimum): -40 F
Certifications: FCC, CE, UL
ROHS Compliant: Yes
Signal to Noise Ratio: 67 dB
Depth: 19 in
Height: 6 in
Width: 7.50 in
Shipping Weight: 8 lbs
Warranty (Length/Type): Lifetime
Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5 V pk-pk
Number of Input/Output Channels: 24
Bandwidth (minimum): 10 - 6.5 Hz - MHz per channel
Differential Gain: <2 %
Differential Phase: 0.7 °
Tilt: <1 %
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
Wavelength: Single Mode 9/125?m
Number of Fibers: 1
LED Indicators: Video Sync Presence for Each Video Channel - Optical Carrier Detect - Power
Optical Emitter: Laser Diode
Optical Connector: ST
Power Connector: Terminal Block
Video Connector: BNC (Gold Plated Center-Pin)
Power: Input Voltage: 90-264 VAC @ 70 W Maximum
Power: Output Voltage: 9 VDC +/- 5% @ 6.5 Amps @ 75°C
Fusing: 1.25 A slow blow (rack power supply) (plug-in modules individually electronically fused)
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
MTBF: >100,000 hours
Storage Temp: -40 to +85 °C
Relative Humidity: 0 to 95 % (non-condensing)