The ComNet™ FVTDR101B for the Bosch dome camera system supports the simultaneous transmission of video in one direction and pan tilt and zoom control signals in the reverse direction. The module is compatible with the ComNet FVRDT10M1, which is both a stand alone and rack mount device. The FVTDR101B supports RS-232 and RS-422 data signals from the receiver to the transmitter and outputs RS-422 data into the Bosch dome. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. The FVTDR101B is camera mounted and powered by the camera’s internal power supply. Bi-color (Red/Green) LED indicators on the receiver are provided for rapidly ascertaining equipment operating status. The receiver module is interchangeable between stand-alone or card mount configurations.
AM video transmission
Full color compatibility
Supports RS-232 or RS-422 data interfaces
Transparent to data encoding
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Full range Automatic Gain Control (AGC)
Designed to meet the full environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specifi
Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
Bi-color (Red/Green) LED status indicators provide indication of critical operating parameters
Integrated WDM for greater product reliability
Hot-swappable receiver module
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
167 F
Operating Temperature (Minimum):
-40 F
Certifications:
FCC, CE, UL
Signal to Noise Ratio:
55 dB
Depth:
6.10 in
Height:
1.10 in
Width:
5.30 in
Shipping Weight:
2 lbs
Warranty (Length/Type):
Lifetime
Video Output:
1 volt pk-pk (75 ohms)
Bandwidth:
5 - 10 Hz - MHz
Differential Gain:
<5 %
Differential Phase:
<5 °
Tilt:
<1 %
Max. RG-59 COAX Distance:
100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
Data Interface:
RS232, RS422
Data Format:
NRZ, NRZI, Manchester, Bi-phase
Data Rate:
DC-100 Kbps (NRZ)
Wavelength:
1310/850 Nm Multimode
Number of Fibers:
1
LED Indicators:
- Video Present - Data Present
Optical Connector:
ST
Power and Data (FVR) Connector:
Terminal Block
Video and Sync Connector:
BNC (Gold Plated Center-Pin)