The ComNet™ FVT/FVR80D8SFP series optical video link provides transmission of eight 10-bit short-haul quality Digitally Encoded video channels and eight bi-directional data channels through a selectable small form factor pluggable module (SFP). The data channels support RS232, RS422 and 2 wire and 4 wire RS485. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for confirming operating status. These units are interchangeable between stand-alone or card mount configurations.
Up to eight 10-bit digital video channels
8 Bi-directional data channels
Uses interchangeable SFPs for fiber type, distance and connector
Exceeds all requirements for RS-250C short-haul transmission
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage p
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Automatic resettable fuses on all power lines
Hot-swappable rack modules
Interchangeable between stand-alone or rack mount use – ComFit
Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
167 F
Operating Temperature (Minimum):
-40 F
Certifications:
FCC, CE, UL
ROHS Compliant:
Yes
Depth:
6.10 in
Height:
3.30 in
Width:
5.30 in
Shipping Weight:
2 lbs
Warranty (Length/Type):
Lifetime
Video Input:
1 volt pk-pk (75 ohms)
Overload:
>1.5 V pk-pk
Bandwidth:
5 - 6.5 Hz - MHz
Differential Gain:
<2 %
Differential Phase:
<0.7 º
Tilt:
<1 %
SIGNAL-TO-NOISE RATIO (SNR):
67 dB @ Maximum Optical Loss Budget
Max. RG-59 COAX Distance:
100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
Data Interface:
RS232, RS422 and RS485 (2W/4W)
Data Format:
NRZ, NRZI, Manchester, Bi-Phase and Sensornet