Eight 10-Bit Digitally Encoded Video Channels + Redundant Point-To-Point Dual Small Form-Factor Pluggable (SFP) Optical Ports

Model: FVT/FVR8SFP2R

Up to eight 10-bit digital video channels
Dual optical ports (SFP) Redundant Point-to-Point configuration
Exceeds all requirements for RS-250C medium haul transmission
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage p

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The ComNet™ FVT/FVR8SFP2R series optical video link provides eight 10-bit medium-haul quality digital video channels, and has dual optical (SFP) ports to provide a redundant Point-to-Point topology. The redundant Point-to-Point topology using the dual optical ports provide fail safe operation in the event of loss of one fiber or one optical module. Each port accepts a wide variety of SFP modules. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for confirming operating status. These units are interchangeable between stand-alone or card mount configurations.

Up to eight 10-bit digital video channels
Dual optical ports (SFP) Redundant Point-to-Point configuration
Exceeds all requirements for RS-250C medium haul transmission
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage p
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Automatic resettable fuses on all power lines
Hot-Swappable Modules
Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters

Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 167 F
Operating Temperature (Minimum): -40 F
Certifications: FCC, CE, UL
ROHS Compliant: Yes
Depth: 6.10 in
Height: 2.20 in
Width: 5.30 in
Shipping Weight: 2 lbs
Warranty (Length/Type): Lifetime
Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5 V pk-pk
Bandwidth: 5 - 6.5 Hz - MHz
Differential Gain: <2 %
Differential Phase: TBA
Tilt: <1 %
SIGNAL-TO-NOISE RATIO (SNR): 67 dB @ Maximum Optical Loss Budget
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
Wavelength: SFP (Small Form-Factor Pluggable) dependent
Number of Fibers: SFP (Small Form-Factor Pluggable) dependent
Optical Emitter: SFP (Small Form-Factor Pluggable) dependent
LED Indicators: Fiber Status - Video Sync Presence - Power
Optical Connector: 2 SFP modules Dual Port configuration (Required for Redundant Point-to-Point operation)
Power Connector: Terminal Block
Video Connector: BNC
Power: Surface Mount: 8-15 VDC @ 3W
Rack Mount: From Rack
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
MTBF: >100,000 hours
Storage Temp: -40 to +85 °C
Relative Humidity: 0 to 95 % (non-condensing)