Exceeds all requirements for RS-250C short-haul transmission
Compatible with Pelco Spectra III/IV
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
The ComNet™ FVT1031P series video transmitter along with the ComNet™ FVR1031 series receiver supports simultaneous broadcast-quality video transmission of 10-bit Digitally Encoded video and bi-directional RS422 data over one multimode or single mode optical fiber. The FVT1031P is designed to plug directly into the Pelco Spectra III/IV dome, and connects with power, video input and two way data via the Pelco electrical connector.
10-bit digital video transmission
Exceeds all requirements for RS-250C short-haul transmission
Compatible with Pelco Spectra III/IV
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Distances up to 60 km (37 miles)
Designed to be internally mounted within a Pelco Spectra dome
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
167 F
Operating Temperature (Minimum):
-40 F
Signal to Noise Ratio:
67 dB
Depth:
4 in
Width:
2.50 in
Shipping Weight:
0.50 lbs
Warranty (Length/Type):
Lifetime
Video Input:
1 volt pk-pk (75 ohms)
Overload:
>1.5 V pk-pk
Bandwidth:
5 - 6.5 Hz - MHz
Differential Gain:
<2 %
Differential Phase:
0.7 °
Tilt:
<1 %
Max. RG-59 COAX Distance:
100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
Data Format:
RS-422
Data Rate:
DC-115 Kbps (NRZ)
Wavelength:
1310/1550 Nm MM and SM
Number of Fibers:
1
Optical Emitter:
Laser Diode
Optical Connector:
ST
Power:
8-15 VDC, 80 mA from Dome
Current Protection:
Automatic Resettable Solid-State Current Limiters