10-bit digital bi-directional video transmission or video sync + bi-directional data
Exceeds all requirements for RS-250C short-haul transmission: True broadcast video performance
Supports RS232, RS422 or RS485 (2 or 4-wire) data interfaces
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage p
The ComNet™ FVTRD(M)(S)1 series video transmitter/ receiver and data transceiver supports simultaneous transmission of short-haul quality 10-bit bi-directional Digitally Encoded video or video sync plus bi-directional data over one multimode or single mode optical fiber. The module is universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces, and most major data protocols. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are interchangeable between stand-alone or card mount configurations.
10-bit digital bi-directional video transmission or video sync + bi-directional data
Exceeds all requirements for RS-250C short-haul transmission: True broadcast video performance
Supports RS232, RS422 or RS485 (2 or 4-wire) data interfaces
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage p
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Automatic resettable fuses on all power lines
Hot-swappable rack modules
Interchangeable between stand-alone or rack mount use – ComFit
Distances up to 30 miles (48 km)
Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
Applications:
High-Performance CCTV with PTZ Control
Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
167 F
Operating Temperature (Minimum):
-40 F
Certifications:
FCC, CE, UL
ROHS Compliant:
Yes
Signal to Noise Ratio:
67 dB
Depth:
6.10 in
Height:
1.10 in
Width:
5.30 in
Shipping Weight:
2 lbs
Warranty (Length/Type):
Lifetime
Video Input:
1 volt pk-pk (75 ohms)
Overload:
>1.5 V pk-pk
Bandwidth:
5 - 10 Hz - MHz
Differential Gain:
<2 %
Differential Phase:
0.7 °
Tilt:
<1 %
Max. RG-59 COAX Distance:
100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
Data Format:
RS232, RS422, 2 or 4-wire RS485 w/Tri-State, Manchester and bi-phase
Data Rate:
DC-115 Kbps (NRZ)
Wavelength:
1310/1550 Nm MM and SM
Number of Fibers:
1
Optical Emitter:
Laser Diode
LED Indicators:
- Video - Received Data - Transmitted Data - Optical Carrier Detect
Optical Connector:
ST (Standard) SC or FC (Optional)
Power Connector:
Terminal Block
Video Connector:
BNC (Gold Plated Center-Pin)
Data Connector:
Terminal Block
Power Surface Mount:
8-15 VDC @ 2W
Rack Mount:
From Rack
Number of Rack Slots:
1
Current Protection:
Automatic Resettable Solid-State Current Limiters