The ComNet™ FVTR(M)(S)1 series video transmitter/ receiver supports the transmission of short-haul quality 10-bit Digitally Encoded bi-directional video or sync over one multimode or single mode optical fiber. This module is universally compatible with major CCTV camera manufacturers. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are interchangeable between stand-alone or card mount configurations.
10-bit Digital Video Transmission
Bi-directional Video or Sync
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Full Color Compatibility
Exceeds RS-250C Short-Haul quality
No In-field electrical or optical adjustments
Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
Integrated WDM for greater product reliability
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Distances up to 30 miles (48 km) without repeaters
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage p
Hot-swappable rack modules
Interchangeable between stand-alone or rack mount use
ComFit
Automatic resettable fuses on all power lines
Applications:
CCTV
Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
167 F
Operating Temperature (Minimum):
-40 F
Certifications:
FCC, CE, UL
ROHS Compliant:
Yes
Signal to Noise Ratio:
67 dB
Depth:
6.10 in
Height:
1.10 in
Width:
5.30 in
Shipping Weight:
2 lbs
Warranty (Length/Type):
Lifetime
Video Input:
1 volt pk-pk (75 ohms)
Overload:
>1.5 V pk-pk
Bandwidth:
5 - 10 Hz - MHz
Differential Gain:
<2 %
Differential Phase:
<0.7 °
Tilt:
<1 %
Max. RG-59 COAX Distance:
100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
Wavelength:
1310/1510 Nm Multimode & Single Mode
Number of Fibers:
1
LED Indicators:
Video Present - Power - Optical
Optical Connector:
ST
Power Connector:
Terminal Block
Video Connector:
BNC (Gold Plated Center-Pin)
Power: Surface Mount:
8-15 VDC @ 2W
Rack Mount:
From Rack
Number of Rack Slots:
1
Current Protection:
Automatic Resettable Solid-State Current Limiters