The ComNet™ FVTVCND and FVR109A are a video transmitter/data transceiver and video receiver/data transceiver series that supports the simultaneous transmission of short haul quality 10-bit EIA RS-250C digitally encoded video and bi-directional data over one multimode or single mode optical fiber. The FVTVCND is designed to be internally mounted in and powered by the Vicon Dome camera. It supports Vicon Vicoax™ “up-the-coax” data transmission, achieving distances of 600m. It also supports bi-directional serial camera control. Packaged in the exclusive ComNet ComFit housing, the full-size receiver units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
Supports Vicon Vicoax™ up-the-coax systems
10-bit digitally encoded video
1 bi-directional data channel
Distances up to 30 miles (48 km)
Vicoax distance to 600m (2000 ft)
Exceeds all requirements for RS-250C short-haul transmission: True broadcast 10-bit digitally encoded video performance
Compatible with all NTSC, PAL, or SECAM CCTV camera systems
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage p
Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
Automatic resettable fuses on all power lines
Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
Applications:
High-Performance CCTV with PTZ Control
Warranty - Yes
ROHS Compliant - Yes
Rackmountable - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
167 F
Operating Temperature (Minimum):
-40 F
Certifications:
FCC, CE, UL
ROHS Compliant:
Yes
Signal to Noise Ratio:
67 dB
Depth:
6.10 in
Height:
1.10 in
Width:
5.30 in
Shipping Weight:
2 lbs
Warranty (Length/Type):
Lifetime
Video Input:
1 volt pk-pk (75 ohms)
Overload:
>1.5 V pk-pk
Bandwidth:
5 - 10 Hz - MHz
Differential Gain:
<2 %
Differential Phase:
0.7 °
Tilt:
<1 %
Max. RG-59 COAX Distance:
100m (300ft) Camera to Fiber Optic Module to maintain 10Mhz Bandwidth
Data Interface:
RS232, RS422 and RS485 (2W/4W), UTC (Up-the-Coax)
Data Rate:
DC-250 Kbps (NRZ)
Wavelength:
1310/1550 Nm MM and SM
Number of Fibers:
1
Optical Emitter:
Laser Diode
LED Indicators:
- Link - Video - Data
Optical Connector:
1 ST connector
Power Connector:
Terminal Block
Video Connector:
BNC (Gold Plated Center-Pin)
Data Connector:
Terminal Block
Power Surface Mount:
8-15 VDC @ 350mA
Rack Mount:
From Rack
Rack Slots:
1
Current Protection:
Automatic Resettable Solid-State Current Limiters