The ComNet™ FVT/FVRXA4C1 series audio multiplexer provides the transmission of four audio signals and one bi-directional contact closure over one multimode or single mode optical fiber. The modules use 24-bit 96kHz sample rate digital encoding for superior transmission of balanced line-level audio. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators confirm equipment operating status. These units are interchangeable between stand-alone or card mount configurations.
24-bit 96kHz Digital Transmission
One Bi-directional Contact Closure
20Hz - 18kHz Audio Bandwidth
600 Ohms Audio Input Impedance
No In-field electrical or optical adjustments
Bi-color (Red/Green) LED status indicators confirm equipment operating status
Transmits Balanced Line-Level Audio up to +6dBm
Hot-swappable rack modules
Interchangeable between stand-alone or rack mount use – ComFit
Distances up to 30 miles (48 km) without repeaters
Automatic resettable fuses on all power lines
Applications:
Transmission of Broadcast Audio
Recording Studios and Post-Production Facilities
Elimination of EMI/RFI Interference in Audio Cables
Optical Isolation for Elimination of Ground Loop Noise
Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
167 F
Operating Temperature (Minimum):
-40 F
Certifications:
FCC, CE, UL
ROHS Compliant:
Yes
Signal to Noise Ratio:
85 dB
Depth:
6.10 in
Height:
1.10 in
Width:
5.30 in
Shipping Weight:
2 lbs
Warranty (Length/Type):
Lifetime
Number of Input/Output Channels:
4 (balanced)
Audio Input/Output Signal:
4.4 volt pk-pk (+6dBm)
Bandwidth:
20 - 18 Hz - kHz
Total Harmonic Distortion:
0.05 %
Contact Interface: Response Time:
0.5 msec
INPUT:
Dry Contact Closure
Output:
SPST Relay, 0.5 A Contact Rating - normally open
Wavelength:
1310/1550 Nm Multimode and Single Mode
Number of Fibers:
1
LED Indicators:
- Link - Audio Input Channels 1-4 - Contact Closure - Power
Optical Connector:
ST
Power Connector:
Terminal Block
Audio Connector:
Terminal Block
Power - Surface Mount:
8-15 VDC @ 2W
Rack Mount:
From Rack
Number of Rack Slots:
1
Current Protection:
Automatic Resettable Solid-State Current Limiters