Call us today! 631-667-0973

Pro AV Catalog
Crestron Electronics, Inc. - CLX-2DIMFLV8-277
Crestron Electronics, Inc. - CLX-2DIMFLV8-277 Crestron Electronics, Inc. - CLX-2DIMFLV8-277
Request Quote
All Products
crestron-electronics

8-channel 277V/0-10V Dimmer Module, 2 Feeds

Model: CLX-2DIMFLV8-277

Part #: 6507763

  • Eight-channel 0-10V dimmer module for commercial lighting applications
  • Installs in a Crestron® CAEN enclosure
  • Supports 0-10V dimmable fluorescent ballasts and LED drivers
  • Also supports on/off switching of non-dimmable lighting loads
  • Single or dual feeds - two four-channel dimmers in one module
Compare
Project List
Product Info
Tech Specs
Related Products
Documents

Provides eight channels of dimming for 277 Volt commercial lighting applications. Supports 0-10 Volt dimmable fluorescent ballasts and LED drivers. May also be used to switch non-dimmable lighting loads. Installs in a CAEN wall mount automation enclosure as part of a complete Crestron® centralized lighting control system.

Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

Overview:

The Crestron® CLX-2DIMFLV8-277 is an eight-channel, two-feed dimmer module designed for 277V lighting system applications. It installs in a CAEN enclosure and provides control of 0-10 Volt dimmable fluorescent ballasts and LED drivers. It can also be used to switch non-dimmable lighting loads. Dual feed capability provides two independent four-channel dimmers in one module space. Each output channel is rated for 16 Amps, with a total module rating of 32 Amps when fed from two separate 20 Amp feeds.

Centralized Lighting Cabinet Installation

Crestron CLX series lighting control modules are designed to be installed in a CAEN wall mount enclosure. Available in a variety of sizes, CAEN enclosures provide a scalable, high-density centralized lighting control solution for any-sized commercial facility. A selection of CLX module types is offered to accommodate a wide range of load types and system configurations.

Termination of high-voltage wiring to the CLX-2DIMFLV8-277 module is facilitated using a CLT-2DIMFLV8-277 terminal block, which is sold separately to enable termination of the wiring prior to installing the module. This terminal block mounts beside the module within the enclosure. The 0-10V control wires terminate to the front of the module via detachable terminal blocks. Other low-voltage control signals are bussed between each of the modules within an enclosure via a simple 5-wire link (interconnect jumpers included), which terminates to a single terminal block at the bottom of the enclosure.

Cresnet® Communications

The CLX-2DIMFLV8-277 interfaces with a Crestron control system (a.k.a., control processor or automation processor) via Cresnet. Cresnet is a simple 4-wire network bus that provides the communications backbone for a system of Crestron lighting dimmers, switches, keypads, shades, thermostats, and other devices.

  • Eight-channel 0-10V dimmer module for commercial lighting applications
  • Installs in a Crestron® CAEN enclosure
  • Supports 0-10V dimmable fluorescent ballasts and LED drivers
  • Also supports on/off switching of non-dimmable lighting loads
  • Single or dual feeds - two four-channel dimmers in one module
  • Rated 16 Amps per channel, 32 Amps total (using two 20 Amp feeds), at 277 Volts AC
  • Customizable dimming curves via software
  • Arcless switching
  • Built-in air gap relay per channel
  • Closure-activated override mode
  • UL® 924 and CSA® C22.2 No. 141-15 listed for emergency lighting control
  • Crestron system integration via Cresnet®
  • Easy termination using a CLT-2DIMFLV8-277 terminal block
  • CEC Title 24 2013 compliant
 
Request Quote
 

Advance Sound Company

157 Rome Street

Farmingdale, New York, 11735