Call us today! 631-667-0973

Pro AV Catalog
Crestron Electronics, Inc. - FT2A-CBLR-1T-USBC-PWR
Request Quote
All Products
crestron-electronics

One-touch Cable Retractor for FT2 ELEC Series, USB-C to USB-C, 60 W

Model: FT2A-CBLR-1T-USBC-PWR

  • Connectivity for FT2 ELEC Series FlipTops™ cable management systems
  • Electrically clutched, spring powered retraction mechanism
  • Cable pulls out smoothly up to 5 ft (1.5 m) and retracts gently with the press of a button
  • Control system integration enables remote retraction control
  • Flexible, low friction flat cable construction
Compare
Project List
Product Info
Tech Specs
Related Products
Documents

Crestron® One-Touch Cable Retractors (FT2A-CBLR-1T Series) offer a refined cable management solution for use with Crestron FT2 ELEC Series FlipTops™. Each cable pulls out smoothly up to 5 ft (1.5 m) and retracts gently back into the FlipTop™ with the touch of a button. The button on each module is backlit for visibility in a darkened room and is labeled with an international symbol icon indicating the connection type.

Automate one-touch retractors by connecting the retractors in a FlipTop to a control system and a switch or to a DMPS via a single Cresnet cable. Custom programming can trigger all the cables to retract after five minutes of no video being detected.

The retractor mechanism allows for a compact design that is ideal for applications where vertical clearance is limited beneath the table.

Each One-Touch Cable Retractor is composed of a retractor enclosure and pass-through module. The enclosure attaches to the FlipTop chassis beneath the table, while the module installs in the top of the FlipTop. A cable tail is provided below the table for connection to a DM® transmitter or similar interface device.1

The pass-through module occupies two module slots within the FlipTop. The retractor enclosure slides onto the side of the FlipTop chassis beneath the table and locks into place with a snap. Retractors normally install at the left and right ends of a module row but may also be installed in the middle of a row by adding an FT2A-CBLR-BRKT series mid-row adapter bracket (one per row, each sold separately).

  • Connectivity for FT2 ELEC Series FlipTops™ cable management systems
  • Electrically clutched, spring powered retraction mechanism
  • Cable pulls out smoothly up to 5 ft (1.5 m) and retracts gently with the press of a button
  • Control system integration enables remote retraction control
  • Flexible, low friction flat cable construction
  • Soft-feel sculpted connectors for easy handling
  • Backlit international symbol icon identifies the connector type
  • Active models support 4K60 4:4:4 digital AV signals
  • Support for HDR and HDCP 2.2
  • 4K models available to convert from DisplayPort™ to HDMI® connectivity, Mini DisplayPort to DisplayPort, Mini DisplayPort to HDMI, and USB-C® to HDMI connectivity
  • Power module available for USB-C® to USB-C (60 W)
  • Passive models available for HDMI, VGA, stereo audio, LAN, and USB 2.0
  • Requires two module slots at either end of a FlipTop™ module row
  • Optional mid-row installation using additional brackets
  • Retractor housing snaps onto the side of the FlipTop chassis beneath the table
  • Requires only 11-5/8 inch (295 mm) vertical clearance below the table top surface
  • Provides a 2.75 or 4.75 ft (0.8 or 1.4 m) long tail below the table
 
Request Quote
 

Advance Sound Company

157 Rome Street

Farmingdale, New York, 11735