DM Lite® 4K60 4:4:4 Receiver for HDMI® and USB 2.0 Signal Extension over CATx Cable, Wall Plate, Black

Model: HD-RXU-4KZ-101-2G-B

Part #: 6511932

DM Lite® receiver functionality designed to interoperate with a DM Lite HD-TXU-4KZ Series transmitter
Point-to-point extension of an HDMI® AV signal and USB 2.0 data signals over a CAT5e or higher cable
DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
4K60 4:4:4 capability
HDR10, HDR10+, and Dolby Vision® video formats

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The HD-RXU-4KZ-101-2G is a DM Lite® 4K60 4:4:4 wall plate receiver designed to interoperate with a DM Lite HD-TXU-4KZ Series transmitter for the extension of HDMI® and USB 2.0 signals. This is useful in applications where an AV source is located remotely from its destination, such as a display, projector, or codec solution. A CAT5e or higher twisted pair cable must be used to connect the HD-RXU-4KZ-101-2G to the DM Lite transmitter.

The HD-RXU-4KZ-101-2G is available in black (model HD-RXU-4KZ-101-2G-B).

Interoperability with a DM Lite HD-TXU-4KZ Series Transmitter

For interoperability between the HD-RXU-4KZ-101-2G and an HD-TXU-4KZ Series transmitter, the DM Lite input port of the HD-RXU-4KZ-101-2G must be connected to the DM Lite output port of the HD-TXU-4KZ Series transmitter. Examples of supported DM Lite transmitters are the HD-TXU-4KZ-111-E and HD-TXU-4KZ-111-2G.

4K60 4:4:4 and HDR Support

The HD-RXU-4KZ-101-2G supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.

USB 2.0 Data Extension

Two USB 2.0 host ports are provided on the HD-RXU-4KZ-101-2G, enabling connection to a wide variety of supported USB 2.0 peripheral devices.

Two-Gang Wall Plate Design

The HD-RXU-4KZ-101-2G is designed to mount into a 2-gang U.S. electrical box or plaster ring (not included). The HD-RXU-4KZ-101-2G can receive power from the remote DM Lite transmitter (surface mountable only).

DM Lite® receiver functionality designed to interoperate with a DM Lite HD-TXU-4KZ Series transmitter
Point-to-point extension of an HDMI® AV signal and USB 2.0 data signals over a CAT5e or higher cable
DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
4K60 4:4:4 capability
HDR10, HDR10+, and Dolby Vision® video formats
Compliance with HDCP 2.3
CEC (Consumer Electronics Control) pass-through capability
EDID pass-through capability
Two-gang wall plate design with black finish
Decorator style faceplate required (FP-G2-DM Series sold separately)
Power from the remote DM Lite transmitter (surface mountable only)

Receiver/Transmitter Format Type - HDMI
Receiver/Transmitter Format Type - USB
Supported Resolution - 1080i (1920x1080)
Supported Resolution - 1080p (1920x1080)
Supported Resolution - WQXGA (2560x1600)
Supported Resolution - Other
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Certifications: CE, IC, FCC
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 0.75 Amps
DC Voltage: 24 Volts
Color: Black
Depth: 1.70 in
Height: 4.12 in
Width: 3.57 in
Product Weight: 0.43 lbs
Video:
•Input Signal Type: DM Lite® with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support
•Output Signal Type: HDMI® with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support2 (DVI compatible)
•Copy Protection: HDCP 2.3
Audio:
•Input Signal Type: DM Lite
•Output Signal Type: HDMI
•Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
COMMUNICATIONS:
•HDMI: HDCP 2.3, EDID, CEC pass-through
•DM Lite: HDCP 2.3, EDID pass-through; USB 2.0 up to 300 Mbps
•USB: USB signal extension via USB 2.0 host ports
•Ethernet:100/1000 Mbps pass-through
Connectors:
•HDMI OUT: (1) HDMI Type A connector, female; HDMI digital video/audio output; DVI compatible
•HOST: (2) USB Type-A connectors, female; USB 2.0 host ports; USB signal extender ports for connection to USB mice, keyboards, or other USB 2.0 peripheral devices; Available Power: 500 mA at 5VDC per port
•DM LITE IN: (1) 8-pin RJ-45 yellow connector, female, shielded; DM Lite input port for connection to a DM Lite output port of a DM Lite transmitter
•24V 0.5A: (1) 2-pin 3.5 mm detachable terminal block; 24VDC power input; Power pack sold separately, required only if the HD-RXU-4KZ-101-2G is used with a wall plate transmitter
•Ground: (1) Chassis ground lug
Controls and Indicators:
•PWR: (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.
•HDMI OUT: (1) Green LED, indicates that the device is transmitting an HDMI signal
•LINK: (1) Green LED, indicates that a DM Lite link is established
•RESET: (1) Push button, restores factory default settings
•DM LITE IN: (2) LEDs on RJ-45 connector. Green indicates that a DM Lite link is established. Flashing amber indicates non-HDCP video, and solid amber indicates HDCP video
Humidity: 20% to 90% RH (non-condensing)
Construction:
•Composition: Metal housing and bracket with black polycarbonate front label overlay
•Mounting: Mounts in a 2-gang (or larger) 2-inch (51 mm) deep U.S. electrical box or plaster ring (not included)
•Faceplate: Requires a decorator style faceplate (FP-G2-DM series, sold separately)

Receiver 3152119 kb - Data Sheet

Project List

Receiver 9559749 kb - Other

Project List

AV-iQ Terms and Conditions | | Powered by AV-iQ

Advance Sound Company

157 Rome Street

Farmingdale, New York, 11735