Call us today! 631-667-0973

Pro AV Catalog
Servoreeler Systems - BZ-H
Request Quote
All Products

Bezel Horizontal Adapter

Model: BZ-H

  • 2mm Microphone cable To Servoreeler® Installed Horizontally
  • SPRING HAIRPIN CLIPS: Install after Microphone cable has been guided over the turn rollers. These prevent derailing of the cable after installation.
  • Clearance height from top of Bezel flange: BZ-1 = 4.312" or BZ-2 = 5.375"
  • BZ-H - Clamps to top of Bezel
  • Bezel Switch Output cable - Plugs into miniphone jack on the Servoreeler
Compare
Project List
Product Info
Tech Specs
Related Products
Documents

Install the BZ-H adapter after the microphone, white bezel guide and dust cap are inserted into the bezel bore. The BZ-H adapter clamps to top of an installed Bezel to turn the cable path 90 when overhead clearance is too limited for normal vertical mounting of the Servoreeler®. Employing the BZ-H permits the Servoreeler® to be installed horizontally significantly reducing the required overhead clearance from about 16" total including connectors, to approximately 3". The BZ-H employs the same clamp that is used to install the Ceiling Bezel. This clamp is simply fitted to the top of the installed bezel, pushing it down onto the bezel body until it seats against its stop. Rotate the adapter so that the cable is aimed directly towards the cable exit point on the Servoreeler®; then tighten the Allen cap screw. The Servoreeler® must be installed so that the moving cable will not rub against any stationary surfaces; friction could impair normal Servoreeler® operation and this could also result in abrasion of the cable and eventually permanent damage to the cable jacket.

  • 2mm Microphone cable To Servoreeler® Installed Horizontally
  • SPRING HAIRPIN CLIPS: Install after Microphone cable has been guided over the turn rollers. These prevent derailing of the cable after installation.
  • Clearance height from top of Bezel flange: BZ-1 = 4.312" or BZ-2 = 5.375"
  • BZ-H - Clamps to top of Bezel
  • Bezel Switch Output cable - Plugs into miniphone jack on the Servoreeler
  • BEZEL BODY: Diameter: 1.375", Use 1-3/8" hole - saw to make hole in ceiling material.
 
Request Quote
 

Suggested Products

Advance Sound Company

157 Rome Street

Farmingdale, New York, 11735