Inverter/charger provides DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, standalone power source or an automotive inverter. It supplies up to 3000W of continuous 230V sine wave AC power from any 24V battery or automotive DC source. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 23/90A charging system. In UPS mode, the APS system responds to blackouts and severe voltage fluctuations with near instantaneous automatic transfer to battery-derived AC output. It includes set of high current DC input terminals for simple installation. Built-in automatic voltage regulation (AVR) corrects line power AC brownouts and overvoltages without using battery power during battery charging and UPS standby modes. It supports an unlimited amount of runtime with any number of user-supplied batteries connected. It is highly adaptable to variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages.
Supports 230Vac output from 230Vac line power source or 24Vdc battery source
3-stage, selectable 23/90A battery charger with adjustable settings for wet/gel battery types
3-position operating mode switch supports auto mode to enable automatic transfer between DC and AC modes
Set of 6 front panel LEDs display continuous status information
Set of 4 dip switches support AC input selection of 230V, selectable 50/60Hz frequency and selectable full or half cycle transfer times
Set of 4 dip switches support wet/gel battery charging profiles
Set of 4 additional dip switches support battery equalization program and battery charger low / high settings
Automatic overload and thermal shutoff
Front panel remote control connector enables remote off/on switching
Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode
Remote battery temperature sensing connection function prolongs battery life by adjusting the charge float voltage level based on battery temperature
Warranty - Yes
Spec Sheet available - Yes
AC Voltage:
230 Volts
DC Voltage:
24 Volts
Depth:
12.40 in
Height:
10.08 in
Width:
8.90 in
Product Weight:
64.80 lbs
Shipping Weight:
87 lbs
Warranty (Length/Type):
2-year Limited
Frequency Compatibility:
50/60 Hz
Continuous Output Capacity:
3000 W
Peak Output Capacity:
6000 W
Output Nominal Voltage:
230 V
Outlet quantity/type:
Hardwire
Maximum Input:
28 A
DC Input Connection Type:
Set of DC bolt-down terminals
AC Input Connection Type:
Hardwire via built in terminal strip with cover plate
DC Battery System Voltage:
24 VDC
Battery Recharge Rate:
23/90 A (selectable)
Construction:
Metal
Relative Humidity:
0 to 95 % (non-condensing)
Package Includes:
APSX3024SW inverter/charger, instruction manual, warranty information
RoHS Compliant:
Yes
APSX1012SW
- 1000W APS X Series 12VDC 230V Inverter/Charger with Pure Sine-Wave Output, Hardwired
APSX2012SW
- 2000W APS X Series 12VDC 230V Inverter/Charger with Pure Sine-Wave Output, Hardwired
WEXT1L
- 1-Year Extended Warranty - For select Tripp Lite Products
WEXT2L
- 2-Year Extended Warranty - For select Tripp Lite Products
WEXT3L
- 3-Year Extended Warranty - For select Tripp Lite Products